JSON-LD markup generated by Google Structured Data Markup Helper.

Volkswagen

Home / Volkswagen

We Service and Repair all Volkswagen cars

  • 2014 Volkswagen Jetta

    Volkswagen Jetta
    Mileage
    95,613
    Service Date
    9/13/2023
    Services Performed
    • 1. Lubricate and checked chassis. Changed oil and oil filter. Checked all fluid levels and topped off fluids that needed topped. Checked the tire pressure to 32 PSi. 2. Tire tread depth – LF _8_/32, RF _8_/32, RR _7_/32, RL 8__/32. 3. TIRE ROTATION – Yes / No, If "No" – Then when? 4. Preformed basic safety inspection. Job Completed.
    • P130A00: cylinder disabling – electrical fault in circuit P233800: cylinder 3 above knock threshold P233900: cylinder 4 " P233700: cylinder 2 " P102F00: torque limitation due to fuel pressure P305300: starter activation, return message terminal 50 short circuit to ground, open circuit P240700: emission system leak detection pump sense circuit intermittent/erratic P03B900: cylinder 4 pressure too high B1788F0: control module immobilizer deactivated These codes all in history and not coming current while testing. Would need further evaluation and research of case studies to determine cause. software update and engine decarbon for p2338, 2339,2337, p03b9. emission leak detection pump for p2407.
     
    Rachel C. gave our service a 5 star review on 9/20/2023
  • 2015 Volkswagen Passat

    Volkswagen Passat
    Mileage
    58,097
    Service Date
    11/21/2022
    Services Performed
    • 1. Lubricate and checked chassis. Changed oil and oil filter. Checked all fluid levels and topped off fluids that needed topped. Checked the tire pressure to 32 PSi. 2. Tire tread depth – LF __/32, RF __/32, RR __/32, RL __/32. 3. TIRE ROTATION – Yes / No, If "No" – Then when? 4. Preformed basic safety inspection. Job Completed.
    • Rotated tires front to back. Currently Front tires are _9_/32 and Rear Tires are _9_/32. Inspected the brake pads for wear. The front has __6_MM pad life left and the rear has __6_MM Pad/Shoe life left. Brake Inspection and Tire Rotation completed.
    • recommend a flush. fluid is dark and it is past the recommended changed interval.
    • Remove pan and filter. Thoroughly back flush filter to remove contaminants. Replace filter and pan. Fill fluid and run transmission through gears. Drain transmission. Run to operating temperature and confirm correct fluid level.
     
    Matt K. gave our service a 5 star review on 11/23/2022